1.
J. Lee, M.
He, Z. Hu, G. Kumar, V. D. Thalangamaarachchige, E. L. Quitevis, and
C.-D. Yeo,” Friction and Wear of Pd-rich Amorphous Alloy
(Pd43Cu27Ni10P20) under Dry and Ionic Liquid (IL) Lubricated
Conditions,” Wear 408–409,
190 (2018).
2.
Z. Lin, J.
You, C. Jinghong, and C.-D. Yeo, "Molecular Dynamics Simulations
of Ferroelectric Domain Formation by Oxygen Vacancy"
Journal of Physics D: Applied
Physics 51, 185303 (2018).
3.
M. He, and
C.-D. Yeo, “Evaluation of Thermal Degradation of DLC Film Using a
Novel Raman Spectroscopy Technique,”
Coatings 8(4), 143
(2018).
4.
M. He, and
C.-D. Yeo, “Micro-Wear and Friction of Carbon Film with
Molecularly Thin PFPE Lubricants,”
Journal of Mechanical Science and Technology 32 (7), 3291
(2018).
5.
J. Song and
C.-D. Yeo, “Finite Element Analysis Simulations of
Thermomechanical Head-Disk Interface Contact in Thermal Flying-Height
Control Head Slider Design,”
Tribology International 98, 299 (2016).
6.
J. Park,
Y.-K Hong, H.-K. Kim, W. Lee, C.-D. Yeo, S.-G. Kim, M.-H. Jung,
C.-J. Choi, and O. N. Mryasov, “Electronic structures of MnB soft
magnet,” AIP ADVANCES 6, 055911 (2016).
7.
J. Park,
Y.-K. Hong, C.-D. Yeo, S.-G. Kim, D. Kuo, L. Gao, and J.-U.
Thiele, “Electronic Structure and Magnetic Properties of Mn-substituted
Fe-Pt,” IEEE Trans. Mag 52(7), 3201904 (2016).
8.
J. Song, S.
Lee, J. Lee, and C.-D. Yeo, “Atomic Degradation and Wear of Thin
Carbon Films under High Speed Sliding Contact using Molecular Dynamics
Simulation,” Tribology Letters
60:1,
1–7 (2015)
DOI:
10.1007/s11249-015-0577-3.
9.
C.-D. Yeo,
A. Palazotto, J. Song and R. Buentello, “The Evaluation of
Thermomechanical Damage of a Slipper and Rail in a Rocket Sled System,”
ASTM Journal of Testing and
Evaluation 44(4), 1443 (2016) DOI: 10.1520/JTE20140367.
10.
J. Lee, J.
Maharjan, M. He, and C.-D. Yeo, “Effects of In-Situ Sliding
Contact on Dynamic Adhesion Measurement in Colloidal Probe Technique,”
International Journal of Adhesion
and Adhesives 60, 109 – 116 (2015).
11. M.
He, S. Lee, and C.-D. Yeo, “Investigating Atomic Structure of
Thin Carbon Film under Mechanical Stress and Frictional Heat
Generation,” Surface and Coatings
Technology 261, 79-85 (2015).
12.
S. Lee, M.
He, and C.-D. Yeo, “Thermal Degradation and Burnishing Wear of
Thin Carbon Film by Frictional Heat Generation,”
ASME Trans. Journal of Tribology
136(4), 041603 (2014) DOI: 10.1115/1.4027749.
13.
S. Lee, D.
Purani, A. Kim, and C.-D. Yeo, “(Invited) Thermomechanical
Contact between Magnetic Recording Head and Disk Defect accounting for
Heat Partition Factor,” IEEE
Trans. Magn., 50(30), 3300307 (2014).
14.
S. Lee, M.
He, G. Abo, Y. Hong, and C.-D. Yeo, “The Effects of Contact
Stress on Magnetic Properties of Ferromagnetic Film,”
Journal of Applied Physics
112, 084901 (2012).
>
Featured in
Tribology & Lubrication Technology (TLT) Magazine June 2013
http://digital.ipcprintservices.com/publication/index.php?i=156749&m=&l=&p=3&pre=
15.C.-D.
Yeo,
J.K. Lee, and A.A. Polycarpou, “Dynamic adhesive forces in rough
contacting bodies including normal and sliding conditions,”
Journal of Adhesion Science and
Technology 26, 2709-2718 (2012).
16.
S.A. Lee,
S. Niazie, and C.-D. Yeo, “The Change in Surface Properties of
Magnetic Recording Media under Pulsed Laser Application,”
Tribology Letters 47, 57-65 (2012).
17.
S.A. Lee
and C.-D. Yeo, “Microwear Mechanism of Head Carbon Film during
Head Disk Interface Sliding Contact,”
Tribology International 45,
30-37 (2012).
18.
I.-H. Sung,
H. J. Kim, and C.-D. Yeo, “First Observation on the Feasibility
of Scratch Formation by Pad-Particle Mixture in CMP Process,”
Applied Surface Science 258,
8298–8306 (2012).
>
Featured in
the ADINA News (Tech Review)
http://www.adina.com/newsgH123.shtml
19.
I.-H. Sung,
W.Y. Yang, H. Kwark and C.-D. Yeo, “Fluid-Structure Interaction
Modeling and Simulation of CMP Process for Semiconductor Manufacturing”,
Transactions of the Society of
Information Storage Systems 7(2), 60-64 (2011).
20.
C.-D. Yeo,
R.R. Katta, J.K. Lee and A. A. Polycarpou, “Effect of asperity
interactions on rough surface elastic contact behavior: Hard film on
soft substrate,” Tribology
International, Vol. 43, pp. 1438-1448 (2010).
21.
C.-D. Yeo,
R.R. Katta and A.A. Polycarpou, “Improved Elastic Contact Model
Accounting for Asperity and Bulk Substrate Deformation,”
Tribology Letters 35,
91-203 (2009).
22.
C.-D. Yeo,
S. –C. Lee, and A.A. Polycarpou, “Dynamic adhesive force measurements under vertical and
horizontal motions of interacting rough surfaces”, Review of
Scientific Instruments
79,
015111 (2008).
23.
C.-D. Yeo,
A.A. Polycarpou, S.C. Lee
and
M. Sullivan, “Friction Force Measurements and Modeling in Hard Disk
Drives,” IEEE Trans. Mag. 44, 157-162 (2008).
24.
C.-D. Yeo,
A.A. Polycarpou, J.D. Kiely
and
Y.-T. Hsia, “Nanomechanical Properties of Ultra-thin Carbon Film
Overcoats Using the Nanoindentation Technique”, Journal of Materials
Research 22, 141-151 (2007).
25.
C.-D. Yeo,
A.A. Polycarpou, “A Correction to the Nanoindentation Technique for
Ultra-shallow Indentation Depths”, Journal of Materials Research
22,
2359-2362
(2007).
26.
K.M. Lee,
C.-D Yeo and A.A. Polycarpou, “Relationship between scratch
hardness and yield strength of
elastic perfectly plastic materials
using finite element analysis,” Journal of Materials Research
23,
2229-2237 (2008).
27.
E. E. Nunes,
C.-D. Yeo, R. Katta and A. A. Polycarpou, “Computational Analysis of
the Effects of Planarization in Pattern Media,”
IEEE Trans. Mag.
44,
3667-3670 (2008).
28.
K.M. Lee,
C.-D. Yeo
and A.A. Polycarpou, “Nanomechanical Property and Nanowear Measurements
for Sub-10 nm Thick Films in Magnetic Storage,” Experimental
Mechanics 47, 107-121 (2007).
29. K.M. Lee,
C.-D. Yeo
and A.A. Polycarpou, “Mechanical Property Measurements of Thin Film
Carbon Overcoat on Recording Media towards 1 Tb/in2,”
Journal of Applied Physics
99,
08G906 (2006).
|