|
Google
Scholar Citations:
https://scholar.google.com/citations?user=qBE9284AAAAJ&hl=en
Book:
1.
Shi, Y., Ge, H.W., Reitz, R.D., “Computational optimization of
internal combustion engines”. Springer, 2011.
Book Chapter:
2.
Ge, H.W., Urzica, D., Vogelgesang, M.,
Gutheil, E., “Modeling and simulation of turbulent non-reacting
and reacting spray flows”. In: Reactive flow,
diffusion and transport (W. Jäger, R. Rannacher, J. Warnatz, Ed.), Springer, 2007.
Peer Reviewed Journals and Proceedings:
3.
Ge, H.W., Bakir, A.H., Yadav, S., Kang, Y.S., Parameswara, S., Zhao, P., “CFD optimization
of the pre-chamber geometry for a gasoline spark ignition engine”, Frontier
in Mechanical Engineering, submitted, 2020.
4.
Ram, R., Parameswara, S., Ge, H.W., “Assessments
of Primary Atomization Models for Spray Simulations”, ASME ICED Fall
Technical Conference, ICEF2020-20297, 2020.
5.
Chen, H.B., Ge, H.W.,
Zhao, P., “Two-stage autoignition and
combustion mode evolution in boundary layer flows above a cold flat plate”, Proceedings of the Combustion Institute, in
press, 2020.
6.
Cui, X.G., Wu, W.W., Ge, H.W., “Investigation of airflow
field in the upper airway under unsteady respiration pattern using large
eddy simulation method”, Respiratory Physiology and
Neurobiology,
279: 103468, 2020.
7.
Cui, X.G., Wu, W.W., Ge, H.W., Guan, J., “Numerical study of the respiratory airflow
field in a whole-lung airway model”, Engineering Computations, submitted, 2020.
8.
Lu, Q., Ram, R., Ge, H.W., Parameswara, S., “Numerical Study of a Rotating Liquid Jet
Impingement Cooling System”, International
Journal of Heat and Mass Transfe, 163: 120446, 2020.
9.
Freeman, C., Endres, J., Robinson, J., Parameswaran, S., Ge,
H.W., Zhao P., “CFD-guided Development of A Pre-chamber Ignition System
for Internal Combustion Engines”, International Journal of Powertrains, accepted, 2020.
10.
Tao, M.Y., Ge, H.W., VanDerWege, B., Zhao, P., “Fuel wall film effects on premixed flame propagation, quenching and
emission”, International Journal of Engine Research, 21(6): 1055-1066, 2020.
11.
Mao, R.G., Zeng, X.C., Jing, G.X., Ge, H.W., “Optimization of Piston-Ring System for
Reducing Lube Oil Consumption by CAE approach”, SAE Technical
Paper 2020-01-1339, 2020.
12.
Ge, H.W., He, R., Zhao P., “A
two-layer soot model for hydrocarbon fuel combustion.”, SAE Technical
Paper 2020-01-0243, 2020.
13.
Tao, M.Y., Zhao, P., VanDerWege, B., Iyer, C., Ge,
H.W., “Further
study on wall film effects and flame quenching under engine thermodynamic
conditions”, Combustion and Flame, 216: 100-110, 2020.
14.
Zhao, D.M., Xia, Y.F., Ge, H.W., Lin, Q.Z., Wang, G.F., “Large eddy simulation of ame propagation during the ignition process in an
annular multiple-injector combustor”, Fuel, 263:116402,
2020.
15.
Zeng, X.C., Luo, X.W., Jing, G.X., Zou, P.P., Lin,
Y.X., Tao, W., Yuan, X.J., Ge, H.W.,
“Engine
Cylinder Head Thermal Mechanical Fatigue Evaluation Technology and Platform
Application”, SAE International Journal of Engines, 13(1):101-120,
2020.
16. Lee, B., Parameswaran, S., Ge, H.W., Zhao, P., “CFD simulation of a
premixed hydrogen internal combustion engine”,
ASME ICED Fall Technical Conference,
ICEF2019-7257, 2019. (undergraduate research)
17.
Yang, Q., Ge,
H.W., Zhao, P., “reactingFoam-SCI: An Open Source CFD Platform for
Reacting Flow Simulation”, Computers & Fluids, 190: 114-127, 2019.
18.
Xia, Y.F., Zhao, D.M., Lin, Q.Z., Ge, H.W., Zheng, Y., Wang, G.F., “Experimental and numerical
investigation of ignition process in an annular combustor”, Journal of Zhejiang University
(Engineering Science), accepted, 2019.
19.
Su, X.Y., Chang, B., Ge, H.W., Zhong, L.R., “A Two-step Combustion Model of
Iso-octane for 3D CFD Combustion Simulation in SI Engines”, SAE Technical Paper 2019-01-0201, 2019.
20.
Shah, N., Zhao, P., Ge, H.W., “Prediction of autoignition and flame
properties for multicomponent fuels”, SAE Technical Paper 2019-01-1049, 2019.
21.
Lin, H., Zhao, P., Ge,
H.W., “Flame propagation in mixtures with
non-zero reaction progress”, SAE Technical Paper 2019-01-0946, 2019.
22.
Tao, M.Y., Zhao, P., Szybist, J.P.,
Lynch, P., Ge, H.W., “Insights
on autoignition in engines: combining engine thermodynamic trajectory and
fuel ignition delay iso-contour”, Combustion and Flame, 200: 207-218, 2019.
23.
Ge, H.W., Ye, Z.P., He, R., “Raman Spectroscopy of
Engine-Out Diesel and Gasoline Soot Using Different Laser Power”, Journal of Environmental
Sciences, 79: 74-80, 2019.
24.
Zhao, D.M., Xia, Y.F., Ge, H.W., Lin, Q.Z., Zou, J.F., Wang, G.F., “Simulations of ame propagation during the
ignition process in an annular multiple-injector combustor”, International Journal of Numerical Methods for Heat & Fluid Flow,
in press, 2019.
25.
Ge, H.W., Zhao, P., “Numerical Investigation of the Effects of Spark Plug Orientation on
Flame Kernel Growth”, SAE Technical Paper 2019-01-0005, 2019.
26.
Xia, Y.F., Linghu, C., Zheng, Y., Ye, C.R., Ma, C.B., Ge, H.W., Wang, G.F., “Experimental Investigation of
the Flame Front Propagation Characteristic During Light-round Ignition in
an Annular Combustor”, Flow, Turbulence and Combustion, in press, 2019.
27. Tao, M.Y., Ge, H.W., VanDerWege, B., Zhao, P., “Fuel wall film effects on premixed flame propagation, quenching and
emission”, International Journal
of Engine Research, in press, 2018.
28.
Ge, H.W., Johnson, J.E., Krishnamoorthy, H., Lee, S.Y., Naber, J.D., Robarge, N., Kurtz, E., “A Comparison of CFD Predicted Initial Liquid Penetration Using ROI
Profiles Generated Using Two Different Measurement Techniques”, International Journal of Engine Research, 20(2): 226-235, 2019.
29. Ge, H.W., Zhao,
P., “A Comprehensive Ignition System Model for
Spark-ignition Engines”, ASME ICED Fall
Technical Conference, ICEF2018-9574, 2018.
30.
Muller, M., Freeman, C., Zhao, P., Ge,
H.W., “Numerical
Investigation of Ignition Mechanism in the Main Chamber of Turbulent Jet
Ignition”, ASME ICED Fall Technical Conference, ICEF2018-9587, 2018. (undergraduate research)
31. Tao, M.Y., Zhao, P., DelVescovo, D., Ge,
H.W., “Manifestation of octane rating and fuel
sensitivity for gasoline surrogates under advanced compression ignition
conditions”, Combustion and
Flame, 192: 238-249, 2018.
32.
Ge, H.W., Cho, N.H., “Effects of Numerical Models
on Prediction of Cylinder Pressure Ringing in a DI Diesel Engine”, SAE 2018-01-0194,
2018.
33.
Tao, M.Y., Wu, T., Ge,
H.W., DelVescovo, D., Zhao, P., “A kinetic modeling study on octane rating and fuel
sensitivity in advanced compression ignition engines”, Combustion and Flame, 185: 234–244, 2017.
34.
Liang, L., Ge, H.Q., Ge, H.W., Zhao, P., “A 1-D Platform to Simulate the Effects
of Dedicated EGR on SI Engine Combustion”, SAE Paper 2017-01-0524, 2017.
35.
Ge, H.W., Norconk, M., Lee, S.Y., Naber, J.D., Wooldridge, S., Yi, J., “PIV
measurement and numerical simulation of fan-driven flow in a constant
volume combustion vessel”, Applied Thermal Engineering, 64(1):19-31, 2014.
36.
Johnson, J.E., Ge,
H.W., Naber, J.D., Lee, S.Y., Kurtz, E.,
Robarge, N., “Investigation of Key Mechanisms for Liquid Length Fluctuations in
Transient Vaporizing Diesel Sprays”, SAE Paper
2013-01-1594; SAE Int. J.
Engines 6(2): 1202-1212, 2013
(presenter Jaclyn Johnson won SAE Outstanding Oral Presentation Award).
37.
Ge, H.W., Hu, Y., Gutheil, E.,
"Joint
Gas-Phase Velocity-Scalar PDF Modeling for Turbulent Evaporating Spray
Flows", Combustion Science and Technology, 184(10-11):
1664-1679, 2012.
38.
Johnson, J.E., Naber, J.D.,
Lee, S.Y., Kurtz, E., Robarge, N., Ge,
H.W., “Investigation of Diesel Liquid Spray Penetration Fluctuations under
Vaporizing Conditions”, SAE Paper
2012-01-0455, 2012.
39.
Zhu, M.M., Zhao, P.H., Ge, H.W., Chen, Y.L., “Simulation of vortex shedding
behind a bluff body flame stabilizer using a hybrid U-RANS/PDF method”, Acta Mechanica Sinica,
28(2): 348-358, 2012.
40.
Lee, C.W., Ge, H.W., Reitz, R.D., Kurtz, E.,
Willems, W., “Computational
optimization of a down-scaled diesel engine operating in the conventional
diffusion combustion regime using a multiobjective
genetic algorithm”, Combustion Science and Technology, 184(1): 78-96, 2011.
41.
Ge, H.W., Lee,
C.W., Shi, Y., Reitz, R.D., Willems, W., “Coupling of Scaling Laws and
Computational Optimization to Develop Guidelines for Diesel Engine
Down-sizing”, SAE Paper 2011-01-0836, 2011.
42.
Ge, H.W., Juneja, H., Shi, Y., Yang, S.Y., Reitz, R.D., “A Two-Zone Multi-Grid Model
for SI Engine Combustion Simulation Using Detailed Chemistry”, Journal of Combustion, Article ID 201780, 2010.
doi:10.1155/2010/201780.
43.
Shi, Y., Ge, H.W., Brakora,
J.L., Reitz, R.D., “Automatic
chemistry mechanism reduction of hydrocarbon fuels for HCCI engines based
on DRGEP and PCA methods with error control”, Energy and Fuels, 24(3): 1646-1654, 2010.
44.
Ge, H.W., Shi, Y.,
Reitz, R.D., Wickman, D.D., Willems, W., “Engine development using
multi-dimensional CFD and computer optimization”, SAE Paper 2010-01-0360, 2010.
45.
Wang, Y., Ge, H.W., Reitz, R.D., “Validation of Mesh- and Timestep-Independent Spray Models for
Multidimensional Engine CFD Simulations”, SAE Paper 2010-01-0626; SAE
International Journal of Fuels and Lubricants, 3: 277-302, 2010.
46.
Liang, L., Naik, C.V., Puduppakkam, K.V., Wang, C., Modak,
A., Meeks, E., Ge, H.W., Reitz,
R.D., Rutland, C.J., “Efficient Simulation of Diesel Engine Combustion Using Realistic
Chemical Kinetics in CFD”, SAE Paper
2010-01-0178 (presenter Long Liang won SAE Outstanding Oral
Presentation Award).
47.
Shi, Y., Liang, L., Ge, H.W., Reitz, R.D., “Acceleration
of the chemistry solver for modeling DI engine combustion using dynamic
adaptive chemistry (DAC) schemes”, Combustion Theory and Modelling,
14(1): 69-89, 2010.
48.
Ge, H.W., Shi, Y.,
Reitz, R.D., Willems, W., “Optimization of a HSDI Diesel
Engine at Low-Load Operation Using CFD with Detailed Chemistry and
Multi-Objective Genetic Algorithm”, Proceedings of the Institution of Mechanical Engineers, Part D,
Journal of Automobile Engineering, 224(4): 547-563, 2010.
49.
Shi, Y., Kokjohn, S.L., Ge, H.W., Reitz, R.D., “Efficient multidimensional simulation of HCCI and
DI engine combustion with detailed chemistry”, SAE Paper 2009-01-0701,
2009.
50.
Cantrell, B.A., Ge, H.W., Reitz, R.D., Rutland, C.J., “Validation
of advanced combustion models applied to two-stage combustion in a heavy
duty diesel engine”, SAE Paper 2009-01-0714,
2009.
51.
Ge, H.W., Shi, Y.,
Reitz, R.D., Wickman, D.D., Willems, W., “Optimization
of a HSDI diesel engine for passenger cars using a multi-objective genetic
algorithm and multi-dimensional modeling”, SAE Paper 2009-01-0715;
SAE International Journal of Engines,
2:691-713, 2009.
52.
Ge, H.W., Shi, Y.,
Reitz, R.D., Wickman, D.D., Zhu, G.S., Zhang, H.S., Kalish, Y., “Heavy-duty
diesel combustion optimization using multi-objective genetic algorithm and
multi-dimensional modeling”, SAE Paper 2009-01-0716,
2009.
53.
Ge, H.W., Düwel, I., Kronemayer, H., Dibble, R.W., Gutheil, E., Schulz, C., Wolfrum, J., “Laser based experimental and
Monte Carlo PDF numerical investigation of an ethanol/air spray flame”, Combustion Science and Technology, 180: 1529-1547, 2008.
54.
Ge, H.W., Reitz,
RD, Willems, W., “Modeling the effects of in-cylinder flows on HSDI
diesel engine performance and emissions”, SAE Paper
2008-01-0649; SAE International
Journal of Fuels and Lubricants, 1: 293-311, 2009.
55.
Ge, H.W.,
Gutheil, E., “Simulation
of a turbulent spray flame using coupled PDF gas phase and spray flamelet”, Combustion and Flame, 153(1-2): 173-185, 2008.
56.
Ge, H.W.,
Gutheil, E., “A novel numerical solution scheme for the computation of the particle
velocity in two-phase flows”, Progress
in Computational Fluid Dynamics, 7(8): 466-472, 2007.
57.
Zhu, M.M., Han, S.S., Ge, H.W., Chen, Y.L., “Simulation of bluff body
stabilized flows with hybrid RANS and PDF method”, Acta Mechanica Sinica, 23(3): 263-273, 2007.
58.
Düwel, I., Ge,
H.W., Kronemayer, H., Dibble, R.W., Gutheil,
E., Schulz, C., Wolfrum, J., “Experimental and numerical characterization of a
turbulent spray flame”, Proceedings of the Combustion Institute, 31: 2247-2255, 2007.
59.
Ge, H.W., Zhu,
M.M., Chen, Y.L., Gutheil, E., “Hybrid unsteady RANS and PDF
method for turbulent non-reactive/reactive flows”, Flow, Turbulence and Combustion, 78(2): 91-109, 2007.
60.
Ge, H.W.,
Gutheil, E., “Probability
density function (PDF) simulation of turbulent spray flow”, Atomization and Sprays, 16(5): 531-542, 2006.
61.
Ge, H.W., Dong,
G., Chen, Y.L. “Numerical study of stretch effects on premixed
methane-air flame”, Journal of China University of Science and Technology, 33(3): 369-374, 2003, in
Chinese.
62.
Zhu, M.M., Ge, H.W., Chen, Y.L., Hu, G.H., “FV/MC
hybrid algorithm for axisymmetric bluff body stabilized turbulent flows”, Acta Mechanica Sinica, 35(3): 332-337, 2003, in
Chinese.
63.
Ge, H.W., Zhu,
M.M. Chen, Y.L., “PDF
simulation of bluff-body stabilized turbulent premixed combustion”, Journal of Engineering ThermoPhysics, 24(3): 519-523, 2003, in Chinese.
64.
Ge, H.W., Zhu,
M.M., Hu, G.H., Chen, Y.L., “Hybrid
finite-volume/particle method to solve joint PDF equations”, Journal of
China University of Science
and Technology, 32(5): 607-617, 2002, in
Chinese.
Conference
Papers:
65.
Ge, H.W., Bakir, A.H., Kang, Y., Yadav, S., Parameswaran, S., Zhao, P., “A coupled
genetic algorithm and machine learning method for geometry optimization of a
passive pre-chamber”, ASME ICED Fall Technical Conference, 2020.
66.
Ge, H.W., Bakir, A.H., Kang, Y., Yadav, S.,
Parameswaran, S., Zhao, P., “CFD optimization of pre-chamber
geometry for a gasoline SI engine”, Aramco Global CFD Workshop, 2020.
67.
Lee, B., Ge, H.W., “CFD SIMULATION OF A PREMIXED SPARK
IGNITION HYDROGEN ENGINE”, TTU Undergraduate Research Conference 2020.
(undergraduate research)
68.
Tao, M.Y., Ge, H.W., Zhao, P., “Ignition and
combustion mode evolution in mixtures with thermal and concentration
stratification”, SAE Technical Paper 20PFL-0976.
69.
Freeman, C., Endres, J., Robinson, J., Parameswaran, S., Ge,
H.W., Zhao P., “A Pre-Chamber Ignition System for Internal Combustion
Engines”, SAE Technical Paper 20PFL-0074. (undergraduate research)
70.
Tao, M.Y., Ge, H.W., Zhao, P., “Flame propagation in
partially reacting end-gas conditions”, SAE Technical Paper 20PFL-0988, 2020.
71.
Muthukumar, R., Ge, H.W.,
Parameswaran, S., Vipulanandan, C., “Proper Inlet
Conditions for Modeling Atmospheric Boundary Layer Flows Using Standard k-ε
Model”, Texas Hurrican Center (THC) 2019
Conference, Houston, TX, 2019.
72.
Zhao, D.M., Xia, Y.F., Ge, H.W., Lin, Q.Z., Wang, G.F.,
“Large eddy simulation of ame propagation during
the ignition process in an annular multiple-injector combustor”, Converge User Conference, New
Orleans, LA, 2019.
73.
Ge, H.W., He, R., Zhao, P., “A two-layer soot model”,
Converge User Conference, New
Orleans, LA, 2019.
74.
Muthukumar, R.R., Parameswaran, S., Ge,
H.W., “Spray
A Modelling Using CONVERGE”, Converge
User Conference, New Orleans, LA, 2019.
75.
Freeman, C., Endres, J., Robinson, J., Ge, H.W., Zhao P., Yang,
Y., Wang, G.F., “A Pre-Chamber Ignition System for Internal Combustion
Engines”, 2019 International Conference on Advanced Vehicle
Powertrains,
Hefei, China, 2019.
76.
Smits, T., Moreno, R.M., Ge,
H.W., “Numerical Simulation of Ignition Processes in an Annualar Combustor”,
TTU Undergraduate Research Conference 2019. (undergraduate
research)
77.
Ge, H.W., Zhao, P., “Advanced Ignition System Model for
Spark-ignition Engines”, 29th
International Multidimensional Engine Modeling User’s Group Meeting,
Detroit, MI, 2019.
78.
Ye, Z.P., Ge,
H.W., He, R., “Raman Spectroscopy of Diesel and Gasoline Engine-Out
Soot”, APS March Meeting, Boston, MA, 2019.
79.
Yang, Q., Zhao, P., Ge, H.W., “Open Source CFD for Reacting Flow Simulation: An
Upgraded OpenFOAM Platform”, 11th US National Combustion Meeting, Pasadena, CA, 2019.
80.
Shah, N., Zhao, P., Ge, H.W., “Prediction of autoignition, flame and engine
combustion properties for multicomponent fuels using machine learning”, 11th US National Combustion Meeting, Pasadena, CA, 2019.
81.
Yang, Q., Zhao, P., Ge, H.W., “Open Source CFD for Reacting Flow Simulation: An
Upgraded OpenFOAM Platform”, SAE World Congress, 2019.
82.
Zhao, P., Yang, Q., Ge, H.W., “State of the art combustion modeling with OpenFOAM”, OpenFOAM
Conference North America, Farmington Hills, MI, 2018.
83.
Ge, H.W., Zhao, P., “A Comprehensive Ignition System Model for
Spark-ignition Engines”, Converge
User Conference, Madison, WI, 2018.
84.
Tao, M.Y., Ge, H.W., VanDerWege, B., Zhao, P., “Fuel wall film effects on
premixed flame propagation, quenching and emission”, Converge User Conference, Madison, WI, 2018.
85.
Xia, Y.F., Zheng, Y., Zhao, D.M., Ge, H.W., Wang, G.F., “Numerical Simulations of the Ignition Dynamics in an
Annular Combustor”, 13th World Congress in Computational
Mechanics, New York, USA, 2018.
86.
Ge, H.W., Zhao, P., “An Ignition System Model for
Spark-ignition Engines”, 2018 CSSCI Spring Technical Meeting, Minneapolis,
MN.
87.
Ge, H.W., Ye, Z.P., Ye, G.H., He, R., “Raman Spectroscopy of
Engine-Out Soot Particles Using Different Laser Power”, 2018 CSSCI Spring Technical Meeting, Minneapolis, MN.
88. Tao, M.Y., Ge, H.W., Zhao, P., “Near wall
flame quenching by a liquid fuel film”, 2018 CSSCI Spring
Technical Meeting, Minneapolis, MN.
89.
Zhao, D.M., Lin, Q.Z., Xia, Y.F., Ge, H.W., Wang, G.F., “Simulations of flame propagation during
the ignition process in an annular multiple-injector combustor”, 2018 CSSCI Spring
Technical Meeting, Minneapolis, MN.
90.
Tao, M.Y., Zhao, P., DelVescovo, D., Ge, H.W., “Octane rating, fuel sensitivity and composition effect
on fundamental and engine combustion properties for gasoline surrogates”, SAE World Congress, Detroit, MI, 2018.
91. Ge, H.W., “Computational Optimization of Internal Combustion
Engines”, Texas Systems Day, 2018
92. Li, Y., Ge,
H.W., Li, H.L., “A Numerical Investigation of the Chemical Kinetics in
the Low Temperature Oxidation Process of n-Heptane Spray (I)”, 2018 ESSCI Spring Technical Meeting,
State College, PA.
93.
Li, Y., Ge, H.W., Li, H.L., “A Numerical
Investigation of the Chemical Kinetics in the Low Temperature Oxidation
Process of n-Heptane Spray (II)”, 2018
ESSCI Spring Technical Meeting, State College, PA.
94.
Muller, M., Freeman, C., Ge,
H.W., “Simulating the Future of Internal Combustion Engines”, TTU Undergraduate Research
Conference 2018. (undergraduate research)
95.
Freeman, C., Muller, M., Ge,
H.W., “Numerical Simulation of Ignition Mechanism in The Main Chamber
of Spark-Ignited Natural Gas Engines”,
TTU Undergraduate Research Conference 2018. (undergraduate
research)
96.
Muller, M., Freeman, C., Zhao, P., Ge, H.W., “Numerical simulation of ignition mechanism in the
main chamber of spark-ignited natural gas engines”, 9th CIMAC CASCADES Seminar for Young Engineers, College
Station, TX, 2018. (undergraduate research)
97.
Ge, H.W., Zhao, P., “Fuel wall film
effects on premixed flame propagation, quenching and emission”, 10th
US National Combustion Meeting, College Park, MD, 2017.
98.
Wu, T., Tao, M.Y., Ge, H.W.,
DelVescovo, D., Zhao, P., “A kinetic modeling
study on octane rating and fuel sensitivity under HCCI conditions”, 10th
US National Combustion Meeting, College Park, MD, 2017.
99.
Wu, T., Tao, M.Y., Ge, H.W.,
DelVescovo, D., Zhao, P., “Octane rating and fuel
sensitivity under compression ignition conditions”, SAE World Congress,
Detroit, MI, 2017.
100.
Tao, M.Y., Ge, H.W.,
Zhao, P., “On droplet vaporization under engine conditions”, 2nd Graduate Research Conference at Oakland
University,
Rochester, MI, 2017.
101.
Hu, Y., Ge, H.W., Gutheil,
E., “Joint Gas-Phase Velocity-Scalar PDF Modeling of Turbulent Evaporating
Spray Flows”, 7th International Symposium on Turbulence, Heat
and Mass Transfer, Palermo, Italy, 2012.
102.
Hu, Y., Ge, H.W., Gutheil, E., “Joint Velocity-Scalar Probability
Density Function Approach for the Modeling of Turbulent Fuel Spray
Flows”, 34th International Symposium on Combustion,
Abstracts of Work-in-Progress Posters, Warsaw, Poland, 2012.
103.
Ge, H.W.,
Gutheil, E., “Joint Velocity-Scalar PDF Modeling of Turbulent Spray
Flows”, 23th International Colloquium on the Dynamics of
Explosions and Reactive Systems, Irvine, CA, July 24-29, 2011.
104.
Nesbitt, J.E., Naber, J.D., Lee, S.Y., Kurtz, E., Robarge, N.,
Ge, H.W., “Investigation of Vaporizing Diesel Liquid
Spray Plume to Plume Penetration Variations”, 23rd Annual Conference on Liquid Atomization and Spray
Systems-Americas, Ventura, CA, May 2011.
105.
Juneja, H., Sczomak, D.P., Yang, S.L., Ge,
H.W., Reitz, R.D., “Application of a G-Equation Based Combustion
Model and Detailed Chemistry to Prediction of Autoignition in a Gasoline
Direct Engine”, 8th
Congress on Gasoline Direct Injection Engines, Augsburg, Germany, Sep.
17-18, 2009, Published by Expert Verlag.
106.
Gutheil, E., Ge, H.W., “Simulation of turbulent
spray flames using coupled PDF and spray flamelet
modeling”, 12th Int. Conf. on Numerical Combustion,
Monterey, CA, March 31-April 2, 2008.
107.
Ge, H.W.,
Gutheil, E., “Joint PDF modeling of non-reacting and reacting turbulent
spray flows”, 19th National & 8th
ISHMT-ASME Heat and Mass Transfer Conference. Hyderabad, India, Jan.,
2008.
108.
Ge, H.W.,
Gutheil, E., “Coupled joint PDF and spray flamelet modeling
for methanol and ethanol/air spray combustion”, 21st
Annual Conference on Liquid Atomization and Spray Systems (Europe), Mugla, Turkey, Sept., 2007.
109.
Ge, H.W.,
Gutheil, E., “Simulation of a turbulent spray flame using coupled PDF
and spray flamelet modeling”, 6th International
Conference on Multiphase Flow (ICMF-2007), Leipzig, Germany, 2007.
110.
Ge, H.W.,
Gutheil, E., “Monte-Carlo joint PDF simulation of spray flames coupled with
spray flamelet modeling”, 23rd
Deutscher Flammentag,
Berlin, Germany, Sept. 12-13, 2007.
111.
Ge, H.W.,
Gutheil, E., “Simulation of a turbulent spray flame using coupled PDF gas
phase and spray flamelet modeling”, Proceeding
of 3rd European Combustion Meeting, Chania, Crete,
Greece, April, 2007.
112.
Yong, W.A., Ge, H.W., “Entropy analysis of a reacting
multi-component mixture”, Proceeding of 5th US National
Combustion Meeting, D06, San Diego, March 25-28, 2007.
113.
Ge, H.W.,
Gutheil, E., “Modeling and simulation of turbulent spray flows using PDF
transport equations”, SPRAY'06-Workshop über
Sprays, Erfassung von Sprühvorgängen
und Techniken der Fluidzerstäubung,
Lampoldshausen, Germany, May 29-30, 2006.
114.
Ge, H.W.,
Gutheil, E., “PDF modeling of turbulent
non-reactive and reactive flows”, Workshop on Understanding and Control of Complex
Chemical Processes, Heidelberg, 2006.
115.
Ge, H.W.,
Gutheil, E., “PDF modeling coupling with the spray flamelet model
for the simulation of a turbulent spray flame”, 31st
International Symposium on Combustion, Abstracts of
Work-in-Progress Posters, Heidelberg, Germany, 2006.
116.
Ge, H.W.,
Gutheil, E., “Stochastic Modeling of Turbulent
Spray Flows”, Joint Workshop on Modeling, Simulation and
Control in Chemical Engineering, Warsaw, Poland, 2005.
117.
Ge, H.W.,
Gutheil, E., “Joint velocity-scalar PDF modeling of turbulent spray flows”,
Proceeding of 20th Annual Conference on Liquid Atomization and
Spray Systems (Europe), 115-120, Orléans, France, 2005.
118.
Düwel, I., Kronemayer, H., Schulz, C., Ge, H.W., Gutheil, E., “Numerical
simulation and experimental investigation of droplet size distribution in
non-reactive turbulent spray flows”, Proceeding of 20th
Annual Conference on Liquid Atomization and Spray Systems (Europe),
349-354, Orléans, France, 2005.
119.
Ge, H.W.,
Gutheil, E., “PDF modeling of the mixing process in turbulent spray flows”,
Proceeding of 20th Colloquium on the Dynamics of Explosions
and Reactive Systems (ICDERS), Montreal, Canada, 2005.
120.
Zhu, M.M., Ge, H.W., Chen, Y.L., “PDF simulation of vortex
shedding behind bluff body”, Proceeding of 1st Workshop
on Quality Assessment of Unsteady Methods for Turbulent Combustion
Prediction and Validation, Darmstadt (Seeheim-Jugenheim),
Germany, June 16-17, 2005.
121.
Ge, H.W., Zhu, M.M., Chen,
Y.L., Gutheil, E., “Hybrid unsteady RANS and PDF method for
turbulent flows”, Proceeding of 1st Workshop on Quality
Assessment of Unsteady Methods for Turbulent Combustion Prediction and
Validation, Darmstadt (Seeheim-Jugenheim),
Germany, June 16-17, 2005.
122.
Ge, H.W., Vogelgesang, M., Gutheil, E., Düwel, I., Kronemayer, H., Schulz, C., “Experimental and numerical
investigation of turbulent spray flows”, SPRAY'05-International Symposium
on Heat and Mass Transfer in Spray Systems, Antalya, Turkey, 2005.
123.
Ge, H.W.,
Gutheil, E., “PDF simulation of turbulent spray flow”, Proceeding
of 19th Annual Conference on Liquid Atomization and Spray
Systems (Europe), 136-142, Nottingham, UK, 2004.
124.
Ge, H.W.,
Gutheil, E., “PDF simulation of turbulent spray flow”, Proceeding
of 2nd International SFB568 workshop,
227-233, Heidelberg, Germany, 2004.
125.
Ge, H.W.,
Gutheil, E., “Numerical simulation of
non-reactive and reactive turbulent spray flows”, 3rd
Fall Workshop on Complex processes: modelling, simulation and optimization, Warsaw, Poland, 2003.
126.
Zhu, M.M., Ge, H.W., Chen, Y.L., “PDF simulation of
bluff-body stabilized turbulent premixed combustion”, Proceeding of
Combustion Meeting of Chinese Society of Engineering Thermophysics,
109-115, 2002, in Chinese.
Invited Conference
Presentations and Panelist:
127.
Moderator,
“Trends for New Energy Commercial Vehicles and How It Impact the Future of
Efficiency and Emissions?”, Global Commercial Vehicle and Off-Highway
Vehicle Summit, Chicago, IL, 2017
128.
Panelist,
“Alternative Fuels Development as a Green Product Trend in USA”, Global
Commercial Vehicle and Off-Highway Vehicle Summit, Chicago, IL, 2017
129.
Keynote
speech, “Computational Optimization of Diesel Combustion”, Global
Commercial Vehicle and Off-Highway Vehicle Summit, Chicago, IL, 2017
130.
Invited
talk, “Computational Fluid Dynamics as a Design Tool”, Physics Colloquium,
University of Northern Iowa, Cedar Falls, IA, 2017.
131.
Panelist
for “Workshop on CFD Application in Automobile Industry”, Bloomfield, MI,
Dec. 12, 2015.
132.
Invited
talk, “3D Combustion CFD Using Converge: FCA US LLC Applications”, Converge
User Conference, Welcome, NC, 2015.
133.
Invited talk, “3D Combustion CFD Simulations at
Chrysler”, DOE VTO Workshop on
Engineering CFD, Southfield, MI, 2014.
134.
Invited talk, “Probability Density Function Modeling of
Turbulent Spray Combustion”, Farewell
Colloquium of the International Graduiertenkolleg
(IGK710), Heidelberg, Germany, 2010.
|